 |
|
| |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
 |
 |
 |
 |
 |
 |
|
 |
|
|
|
|
 |
|
|
||||
|
|
|
|
|
|||||||
|
 |
|
|
|
| Select from SensorLink's full line of meters to the left, or see our meters in action by following the link above. |
| Ampstik |
| High Voltage Ammeter |
| The Ampstik measures the amperage of a live conductor that is placed between its forks. The key features include high voltage operation, sample and hold, rejection of external currents and ±1% accuracy. |
| Ampstik2 |
| Multiple Reading Ammeter |
| The Ampstik 2 uses the same current sensor technology as the original Ampstik. Its key feature is the ability to measure current in multiple locations and save the readings for future review. |
| Voltstik |
| High Voltage Ammeter |
| The Voltstik measures the voltage potential of distribution circuits. Key applications include safety confirmation, troubleshooting voltage problems, and phasing. |
| Qualstik |
| Live-Line Power Quality Meter |
| The Qualstik measures Current, Leading or Lagging Power Factor, and Total Harmonic Distortion (THD). Excellent for surveying primary circuits to determine proper placement of power factor correction devices and identifying power quality issues. |
| Ohmstik |
| Live-Line Ohmmeter |
| The Ohmstik measures microhm resistance and current in a live electrical line. A rise in resistance in an electrical connector is a key early predictor of connector deterioration. |
| Flowstik |
| Live-Line Direction of Current Flow Meter |
| The Flowstik measures the amplitude and direction of flow of the current in a high voltage conductor. |
| Litewires |
| Primary Power Analyzer |
| The PPA system employs the Amp and Volt Litewires, which transfer distribution voltage and current waveforms down to ground level through fiber-optic cables. The Fluke 43 analyzes these waveforms and performs the measurements needed to maintain power systems and troubleshoot power problems. Hotsticks not included. |
|
|
 |
 |
