Transformer Meter

Transformer Meter System Overhead Transformer Meter   Quickly install with Piercing Voltage Connectors &n... read more


Model 8-016 Wide Jaw Amp Litewire

Model Number 8-016 Amp Sensor Opening    3.86 in, 9.84 cm Weight    4.8 lbs, 2.2 kg Range &nbs... read more


Model 8-020XT Ampstik

Model 8-020XT AmpstikModel Number: 8-020XTType Averaging: True RMS Range of OperationVoltage: 0-500kVCurrent: 1-5000A ... read more

Troubleman's Kit

Radio Based Ammeter & Voltmeter

Measure both Amps & Volts
on Primary Distribution Circuits

Two Probes, One Remote Display
with 1% Accuracy for both Amps & Volts

One Volt Resolution to 37,000 Volts
One Amp Resolution to 5,000 Amps

Troubleshoot Problems on Distribution Circuits  



The SensorLink Troubleman's Kit consists of the Radio Ampstik and the radio-based Voltstik. These instruments are designed to assist the modern day electric utility troubleshooter in resolving problems in their low and medium distribution circuits. 


Troubleshooting Voltage Problems
The Voltstik allows the user to measure the potential of any two points within a medium voltage distribution system. Voltage drop along a line can be measured or a check of phase to ground voltage on both the primary and secondary voltages. It can determine if the cause belongs to the utility or the customer.


The most common use for measuring voltage in a distribution system is measuring the phase to phase voltage. In the past, this has been performed with a dedicated instrument called a "Phasing Set", which involves two men and two hot sticks. The SensorLink Voltstik offers advantages to the traditional method. The Voltstik was designed for a one-man crew, allowing a single user to safely take the phasing measurement.


The universal hotstick adaptor and internal structure of both the Ampstik and Voltstik are made of a long, glass, fiber reinforced, thermoplastic polyurethane called Celstran®. This space-age polymer is non-conductive and extremely strong. 


Remote Display
The display shows the amp or voltage measurement and continues to update the reading three times per second using a non-licensed 900 MHz radio. The Remote display gives the user instant confirmation of the reading. The user has the option to hold the display in their hands or mount it to their hotstick. The display also features a five-digit display that shows full scale one amp or volt resolution. While in the HOLD mode, the display will hold up to four readings for both amps and volts. This practical and useful display allows the user to keep both eyes and hands on the task of taking the measurement.



6-333 Troubleman's
Kit in Carrying Case
7-124  Underground
Bushing Probe
7-125  Underground
Auto Clamp Adaptor
7-033  Phasing Probe